Filter
Top Products
69
Notes:
•Alarm all reset will also be conducted when setting
changes are performed in SETUP MENU or WJ-SX650
Series Administrator Console.
• To reset the alarms occurred to recorders, perform
alarm all reset. Alarm all reset is available even while no
alarms are occurring.
■ Return to Alarm Mode Status
You can recover from the ACK status to the alarm mode
status.
● WV-CU950/650
Press the ACK button while holding down the SHIFT button.
The alarm mode will be recovered.
● WV-CU360C/CJ
This operation is not available.
■ Alarm Suspension
You can suspend the unit from accepting alarm input sig-
nals when you do not want to be disturbed.
1. Press the ALM SUSPEND*
1
(or SUSPEND*
2
) button
while holding down the SHIFT button.
The alarm will be suspended.
*
1
WV-CU950/650
*
2
WV-CU360C/CJ
2. To cancel the alarm suspension mode, press the ALM
SUSPEND button while holding down the SHIFT button
again.
■ Alarm History Display
The latest 1 000 alarm records (date, time and details) can
be displayed as the alarm history on an active monitor.
Note: Alarm History Display is not available on monitors in
the alarm mode or during recorder selection.
● WV-CU950/650
Press the ALM RECALL button. The Alarm History Display
will appear on the selected monitor.
● WV-CU360C/CJ
Press the OSD and ALM H buttons at a time. The Alarm
History Display will appear on the selected monitor.
● Details on Alarm History Display
"∗" beside the time indicates daylight saving time (sum-
mer time).
The following items are display details.
• ALARM (Highlighted for reset alarms)
T-001 to 256: Terminal alarm
(Example: For T-001, "001" means the number of
alarm input signal accepted by the ALARM IN port
of video input board.)
C-001 to 999: Camera alarm
(Example: For C-001, "001" means the number of
camera supplying an alarm input signal to the unit.)
R-001 to 999: Recorder alarm
(Example: For R-001, "001" means the number of
camera associated with the recorder supplying an
alarm input signal to the unit.)
S-0001 to 1024: Serial alarm
(Example: For S-0001, "0001" means the serial com-
mand alarm input number.)
V-001 to 999: Video loss
(Example: For V-001, "001" means the number of
camera to which video loss has occurred)
ALL: Alarm all reset
: Alarm suspension ON/OFF
• ACTION
POWER: The unit is powered on. (Highlighted: Power
off)
M01 to 32: Alarm occurred to Monitor 1 to 32. (For
group sequence and group preset, the smallest
monitor number is displayed with "
∗".)
C001 to C999: Camera 001 to Camera 999 was activat-
ed for spot mode.
S
ALARM HISTORY 1 of 100
M D Y H M S ALARM ACTION REC
Aug31/06
∗
11:59:00
PM
ALL 12345 K4-8
Aug31/06
∗
11:58:00
PM
C-999 M32 C100 001
Aug31/06
∗
11:57:00
PM
V-001 M03 T32 256
Aug31/06
∗
11:56:00
PM
POWER
Apr15/05
∗
09:15:25
AM
POWER
Apr15/05
∗
09:15:25
AM
R-003
Apr15/05
∗
09:13:54
AM
S-0002 M10*G32 ———
Apr15/05
∗
09:12:32
AM
T-001 M20 ——— 999
Jan02/05 03:05:10
PM
S 6789 PC
Jan01/05 03:04:08
PM
S 101 PSD
T-TERMINAL C-CAMERA R-RECORDER
S-SERIAL V-VIDEO LOSS SSUSPEND