Filter
Top Products
51
Notes:
• ON is not available for recorders when camera input channels are set for RS-485 cameras. To activate recorder connec-
tions, delete the RS-485 camera settings. (Refer to p. 92.)
• For camera input channels to supply video input signal from recorders, set DATA to OFF. The VD2 and DATA settings are
performed in VD2/DATA/CABLE COMPENSATION. (Refer to p. 91.)
• Set LCN parameters surely for these camera input channels, even though these channels accept video input signals from
recorders. Without LCN settings, recorder selection is unavailable. The channel settings are performed in "System" –
"Recorder" of WJ-SX650 Series Administrator Console.
• Be sure to connect the recorders to the specified DATA ports in the daisy chain. (Refer to p. 63 for connections.)
• Be sure to supply the video input signals from recorders to the specified camera input channels.
RECORDER
No.
1
CAMERA IN No.
32
CAM (Camera input channel No.: Video Input board 1 to 8)
INPUT
BOARD
1
32 64 96 128 160 192 224 256
231316395127159 191 223 255
330306294126158 190 222 254
429296193125157 189 221 253
528286092124156 188 220 252
627275991123155 187 219 251
726265890122154 186 218 250
825255789121153 185 217 249
924245688120152 184 216 248
10 23 23 55 87 119 151 183 215 247
11 22 22 54 86 118 150 182 214 246
12 21 21 53 85 117 149 181 213 245
13
14
20
19
20
19 51 83 115 147 179 211 243
15 18 18 50 82 114 146 178 210 242
16 17 17 49 81 113 145 177 209 241
52 84 116 148 180 212 244
INPUT
BOARD
2
INPUT
BOARD
3
INPUT
BOARD
4
INPUT
BOARD
5
INPUT
BOARD
6
INPUT
BOARD
7
INPUT
BOARD
8