Filter
Top Products
179
Management
Management
SNMP
Overview
If you are using SNMP to manage/configure the IOLAN, or to view statistics or traps, you must set
up a User in SNMP version 3 or a Community in SNMP version 1,2 to allow your SNMP manager to
connect to the IOLAN; this can be done in the DeviceManager, WebManager, CLI, or Menu. You
must then load the
perle-ds.MIB (found on the CD-ROM packaged with the IOLAN) file into your
SNMP manager before you connect to the IOLAN.
Note:
Ensure that the SNMP service found in the Security, Services page is enabled (by default it
is enabled).
Field Descriptions
Configure the following parameters:
Secondary Host If the IOLAN cannot communicate with the primary host, then the IOLAN will
attempt to send system log messages to this preconfigured host; messages will
be displayed on the host’s monitor.
Default: None
Level Choose the event level that triggers a syslog entry.
Data Options: Emergency, Alert, Critical, Error, Warning, Notice, Info,
Debug
Default: Emergency
Contact The name and contract information of the person who manages this SMNP
node.
Location The physical location of the SNMP node.
Community The name of the group that devices and management stations running SNMP
belong to. Community only applies to SNMP v1 and v2c.