Filter
Top Products
83
Serial Port Profiles
Adding/Editing a Multihost Entry
When you click the Add or Edit button, the Host Entry window appears. The hosts in the multihost
list must already be defined (see
Host Table to learn how to create a host). If you add a host that was
defined with its fully qualified domain name (FQDN), it must be resolvable by your configured DNS
server.
Configure the following parameters:
Host Name
TCP Port
TCP Port Specify the TCP port that the IOLAN will use to communicate to the Primary
Host
.
Default: 0
Backup Host Specify a preconfigured host that the serial device will communicate to through
the IOLAN if the IOLAN cannot communicate with the Primary Host.
Default: None
TCP Port Specify the TCP port that the IOLAN will use to communicate to the Backup
Host
.
Default: 10000
Specify the preconfigured host that will be in the multihost list.
Default: None
Specify the TCP port that the IOLAN will use to communicate to the Host.
Default: 0