Filter
Top Products
180
Management
SNMP Traps Tab Field Descriptions
Configure the following parameters:
Internet Address The IP address of the SNMP manager that will send requests to the IOLAN. If
the address is
0.0.0.0, any SNMP manager with the Community name can
access the IOLAN. If you specify a network address, for example
172.16.0.0, any SNMP manager within the local network with the
Community name can access the IOLAN.
Field Format: IPv4 or IPv6 address
Permissions Permits the IOLAN to respond to SNMP requests.
Data Options:
z None—There is no response to requests from SNMP.
z Readonly—Responds only to Read requests from SNMP.
z Readwrite—Responds to both Read and Write requests from SNMP.
Default: None
Read-Write User Specified user can view and edit SNMP variables.
Read-Only User Specified user can only view SNMP variables.
Trap checkbox
Check this box to enable the entry of the trap information.
Internet Address The IP address of the SNMP manager(s) that will receive trap messages from
the IOLAN.
Field Format: IPv4 or IPv6 address
Version
Select the version of trap you want the IOLAN to send.
Type
Select between Trap or Inform. Inform requires receiving host to acknowledge
receipt of the trap.