Filter
Top Products
Management and Configuration
AXIS 5900 User’s Manual 103
4. Click the OK button.
This is the default setting for logical printers PR5 through PR8.
Example:
Follow the instructions below to substitute command strings:
1. From the print server’s internal Web page, select Admin | Logical Printer
Settings.
2. Select the Printer2 tab.
3. Enter the string 01 0A 02 0D 0A 03 1B 47 31 02 1B 59 in the String
Substitutions text field.
4. Click the OK button.
Note:
ASCII to Postscript
Conversion
The Axis Network Print Server logical printers can translate ASCII print
data into PostScript format. This makes it possible to print with a
PostScript printer from a host that does not support PostScript. The
conversion is selected by activating a filter that converts ASCII data into
Postscript. This filter can be activated individually for each logical
printer.
Activate your desired filter by setting the Printing Language Translation
(PRx_FILT) parameter.
Hex Code Explanation
01 length of the string you want to replace
0A the string you want to replace
02 length of the substitute string
0D 0A the substitute string
Assume that you want to replace the UNIX New Line (hex 0A) with an ASCII
NewLine (hex
0D 0A), and the printer command
E
C
G1 (hex 1B 47 31) with
E
C
Y (hex 1B 59) for logical printer PR2.
Hex code
Explanation
01 length of the UNIX New Line command
0A the UNIX New Line command
02 length of the ASCII New Line command
0D 0A the ASCII New Line command
03 length of the replaced printer command
1B 47 31 the replaced printer command
02 length of the new printer command
1B 59 the new printer command
Extensive use of string substitutions will naturally decrease the throughput
rate of the Axis Network Print Server.