Filter
Top Products
Basic Installation (Wired & Wireless)
24 AXIS 5900 User’s Manual
7. To access the WLAN settings page, click Admin | Network Settings |
Detailed View | TCP/IP Network | WLAN
WLAN Parameters Refer to the table below for a description of the WLAN parameter settings
used to configure the Axis Network Print Server for wireless printing.
WLAN Parameters Description
WLAN Node Address
The WLAN node address that is identical to the Axis Network Print
Server serial number which is found on the underside label on the print
server, e.g.
Ser.No: 00:40:8C:10:00:86
WLAN Node Address: 00 40 8C 10 00 86
WLAN Network Speed
Select the appropriate network speed according to your network
environment or select Auto Sense
WLAN Network Mode
Select Ad Hoc mode for peer to peer printing or Infrastructure mode for
wireless communication via an access point.
Note: The WLAN Network Mode must match the mode of the
workstation / laptop. This is set using the computer’s wireless
configuration software.
WLAN SSID
The default SSID (service set identifier) in the Axis Network Print Server
is ’AXIS’ followed by the last six digits of the serial number, e.g.
AXIS100086
Note: the SSID must match the SSID of the WLAN network interface.
This is set using the computer’s wireless configuration software.
WLAN Channel
The default setting is channel 11 (Japan = channel 14) See
“Technical
Specifications”
on page 138 for more information
WLAN Fragmentation Threshold
These parameters are used to optimize the data transmission in
accordance with the IEEE 802.11b standard.
WLAN RTS Threshold