Filter
Top Products
Polycom® RSS™ 4000 User Guide
2-5
Item Details
Configure multicast parameters in the "Recording
parameters-> multicast settings" page. See multicast
settings for details. When not activated, is displayed.
To use the multicast function, acquire a multicast-activated
product key code. Steps for activating the multicast
function are the same as those for new device activation.
Please refer to the Product activation section for further
information.
Encryption
Displays whether the AES encryption function is activated.
When the encryption function is activated,
will be
displayed here, otherwise
will be displayed. For more
information about AES encryption, please refer to the
System Settings.
HD Live Streaming
Displays whether the 720p live streaming function is
activated. After activating the device can live stream at
720p resolution.
Note: 720p 50/60 fps is not yet supported.
The supported number of “Maximum H.323 Connections”, “Maximum
Archive viewers” and “Maximum Recording Sessions” depends on the
license you bought. Please consult your vendor for detail information.
Before using the “Multicast” “Encryption” and “HD Live Streaming”
functions, you need to buy corresponding license and active the device.
Please consult your vendor for detail information.
System Usage
Click on "System Usage" in the navigation bar on the left side of the screen to
view the Polycom® RSS™ 4000's current hard drive usage, CPU usage,
current device time, and synchronization of device time and time on current
computer.
There are 2 hard disk on Polycom® RSS™ 4000. The RAID is configured as
RAID-1 (mirroring). The two hard disks have identical data on them. Data
written to one disk will automatically be duplicated to the other one.
Figure 2-4 System Usage Page