Polycom 3150-30828-001 Server User Manual


 
1-1
1
Polycom® RSS™ 4000
Installation and Preliminary
Configuration
General Safety Precautions
Follow these rules to ensure general safety:
Keep the area around the Polycom® RSS™ 4000 unit clean, free of clutter
and well ventilated.
Decide on a suitable location for the Polycom® RSS™ 4000 rack that will
hold the Polycom® RSS™ 4000 unit and is near a grounded power
outlet.
Use a regulating uninterruptible power supply (UPS) to protect the
Polycom® RSS™ 4000 unit from power surges and voltage spikes, and to
keep it operating in case of a power failure.
Table 1-1 Polycom® RSS
4000 Hardware Specification
Hardware Specification
Intel Xeon 2.33GHzx2, 4GB RAM, 500Gx2 Hard disk
(Disk 1: 500GB / Disk 2 (for mirroring): 500GB).
Form Factor: 2U 19”
Height: (89 mm)
Width: (441 mm)
Depth: (485 mm)
Gross Weight: (19.5 kg)
Power Supply: 700W ATX AC power supply w/PFC, 1+ 1 Redundant Power Supply
AC Voltage: 100 - 240 VAC, 60-50 Hz, 10-4 Amps
Window XP EK
Preparations
Obtain the following information from your network administrator:
Polycom® RSS™ 4000 unit, Subnet Mask and Default Gateway IP
addresses.
Gatekeeper IP address, Prefix, and E.164 of the Polycom® RSS™ 4000.