Filter
Top Products
Chapter 5 -
5-4
Appendix A – Terminal Setting and User Commands
“cleankey” after the prompt "#" and press Enter to remove the existing
activation key code.
# cleankey
Are you sure to clean activation key.
WARNING: RSS will be inactivated after this operation.
..............................? [Y for yes / N for no]
The system displays the prompt to confirm the operation, enter “Y” to
continue, or enter “N” to cancel.
ClearArchives
This command is used to delete all video files on the Polycom® RSS™ 4000.
Enter "ClearArchives" after the prompt "#" and press Enter to implement this
operation.
# ClearArchives
Please input administrator's password to continue:
Enter the correct administrator password after the prompt and press Enter;
the system will start to delete all video files on the Polycom® RSS™ 4000.
The following information will be shown after all files have been successfully
deleted:
Clear all archives command send out OK.
Shutdown
This command is used to shut down the operation system of Polycom® RSS™
4000. Enter "shutdown" after the prompt "#" and press Enter to implement
this operation.
# shutdown
Are you sure to shut down system? [Y for yes / N for no]
The system displays the prompt to confirm the operation, enter “Y” to
continue, or enter “N” to cancel.
To restart the Polycom® RSS™ 4000 system after being shut down, turn off the power
first and wait for at least 2 minutes, and then turn on the power to start up the device.
Imageversion
This command is used to view the version information of current image file.
Input “imageversion” after the prompt “#” and press Enter to implement
this operation.
# imageversion
Current image version(0):
ResetConfig
Enter "ResetConfig" after the prompt "#" and press Enter to restore the
Polycom® RSS™ 4000's default configuration. Please enter the administrator
password now.
# ResetConfig