Filter
Top Products
Polycom® RSS™ 4000 User Guide
7-15
Regulatory Notices
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference
at his own expense
In accordance with part 15 of the FCC rules, the user is cautioned that any changes
or modifications not expressly approved by Polycom Inc. could void the user’s
authority to operate the equipment.
EU Regulatory Notices
This Polycom® RSS™ 4000 has been marked with the CE mark. This mark indicates
compliance with EEC Directives 2006/95/EC and 2004/108/EC. A full copy of the
Declaration of Conformity can be obtained from Polycom Ltd, 270 Bath Road, Slough,
Berkshire, SL1 4DX, UK.
この装置は、情報処理装置等電波障害自主規制協議会（ＶＣＣＩ）の基準
に基づくクラス A 情報技術装置です。この装置を家庭環境で使用すると電波
妨害を引き起こすことがあります。この場合には使用者が適切な対策を講ず
るよう要求されることがあります。
声明
此为 A 级产品，在生活环境中，该产品可能会造成无线电干扰。在这种情况下，可能
需要用户对其干扰采取切实可行的措施。
A 급 기기 (업무용 정보통신기기)
이 기기는 업무용으로 전자파적합등록을 한 기기이오니
판매자 또는 사용자는 이 점을 주의 하시기 바라며, 만약
잘못판매 또는 구입하였을 때에는 가정용으로 교환하시기
바랍니다.
WARNING
This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Electrical safety advisory
We recommend that you install an AC surge arrestor in the AC outlet to which this
device is connected. This action will help to avoid damage to the equipment caused
by local lightning strikes and other electrical surges.
S
pecial Safety Instructions
Follow existing safety instructions and observe all safeguards as directed.
Installation Instructions
Installation must be performed in accordance with all relevant national wiring rules.
Mechanical Loading - Mounting of the equipment in the rack should be such that a
hazardous condition is not achieved due to uneven mechanical loading.
Circuit Overloading - Consideration should be given to the connection of the
equipment to the supply circuit and the effect that overloading of the circuits might
have on overcurrent protection and supply wiring. Appropriate consideration of
equipment nameplate ratings should be used when addressing this concern.
Reliable Earthing - Reliable earthing of rack-mounted equipment should be
maintained. Particular attention should be given to supply connections other than
direct connections to the branch circuit (e.g. use of power strips)."
Plug Acts as Disconnect Device
The socket outlets to which this apparatus is connected must be installed near the
equipment and must always be readily accessible.