Filter
Top Products
Programming6–52
Line Spacing n/216 Inch
ASCII Hex Decimal
P–Series SFCC 3 n
SFCC 33 n SFCC 51 n
Serial ESC 3 n
1B 33 n
27 51 n
Purpose
Specifies the line spacing at n/216–inch increments.
where n = 1 to 255
Comment When
the n/216–inch line spacing control code is received, all
line feeds following
are at n/216–inch line spacing until a new line spacing is selected or the power is
reset.
The
control code line spacing selection overrides the control panel line spac
-
ing
setting and the message display reflects the line spacing in lines per inch. For
a
50/216–inch
line spacing, the message display would reflect 4.3 lpi spacing.
The
paper moves only in multiples of the current dot row spacing. If the distance to
move
is other
than a multiple of the current dot row spacing, the remainder is added
to the next paper motion command.
Use caution when combining this control code with other print attributes such as
Elongated
(Double High), Superscript, or Subscript; overlapping lines may occur
.
Printing at different horizontal and vertical densities does not cause overlapping.
Example The following example illustrates n/216–inch line spacing.