Filter
Top Products
Programming6–64
Superscript/Subscript Printing
ASCII Hex Decimal
P–Series SFCC S n
SFCC 53 n SFCC 83 n
Serial ESC S n
1B 53 n
27 83 n
Purpose Selects superscript or subscript printing.
Comment Super/Subscript
font prints
at one–half the normal vertical character height and at
twice the normal vertical density. When the super/subscript control code is re-
ceived,
all characters are superscript or subscript until this feature is reset by the su
-
per/subscript
reset control code or printer reset. Emphasized
print is ignored in the
super/subscript print mode.
In
Serial Matrix protocol, or when the BS feature is
enabled from the control panel
in
P–Series protocol, both superscript and subscript characters
can print in the same
character column using the Backspace (BS) control code (page 6–7).
Use
caution when combining Superscript or Subscript printing with
other print at
-
tributes such as Elongated (Double High), or small line spacing; overlapping lines
may
occur
. Characters with
dif
ferent horizontal or vertical dot densities do not over
-
lap.
Example The
following sample program illustrates superscript/subscript printing and reset.