Filter
Top Products
Programming6–56
Printer Reset
ASCII Hex Decimal
P–Series SFCC
@
SFCC 40 SFCC 64
Serial ESC @
1B 40
27 64
Purpose Initializes all print mode related parameters to values previously saved.
Comment When
reset to the previously saved values, the current line
is set to the top–of–form
position. Print mode, line spacing, international language selection, form length,
skip–over
perforation, and character pitch are reset to previously saved values. (In
the Serial Matrix protocol, this command sets horizontal tabs at
every eighth char
-
acter column.) Character–by–character and line–by–line attributes are canceled.
The
vertical format unit is cleared. Interface parameters and emulation mode (P–Se
-
ries or Serial Matrix) are not affected.