Filter
Top Products
Programming6–4
Control Code Reference Index
The
following index lists the control codes by function and lists the ASCII mnemonic and page num
-
ber. Alphabetical listings by mnemonic and function are provided in Appendix D.
NOTE:
Some contr
ol code functions can be accomplished using another contr
ol code se
-
quence
or via contr
ol panel selection.
PAPER MOTION
FUNCTION P–SERIES SERIAL P
AGE NO.
Form
Feed
FF FF 6–40
Line Feed LF LF 6–45
Line Feed n/216 Inch (1 line only) N/A
ESC J
6–46
Vertical Tab VT VT 6–68
FORMAT
FUNCTION P–SERIES SERIAL PAGE NO.
Backspace BS BS 6–7
Cancel N/A CAN 6–15
Carriage Return CR CR 6–16
Delete N/A DEL 6–30
Forms Length Set (Inches) SFCC INCHES ESC C NUL 6–41
Forms Length Set (Lines) SFCC LINES
ESC C
6–42
Horizontal Tab N/A HT 6–43
Horizontal Tab Set N/A ESC D 6–44
Line Spacing 1/6 Inch (6 lpi)
SFCC 2
ESC 2 6–47
SFCC LPI
Line Spacing 1/8 Inch (8 lpi)
SFCC 0
ESC 0 6–48
SFCC LPI
Line Spacing 8 or 10.3 lpi (1 line only) ACK N/A 6–49
SFCC f
Line Spacing 7/72 Inch
SFCC 1
ESC 1 6–50
Line Spacing n/72 Inch
SFCC A
ESC A 6–51
(as executed by ESC 2)
Line Spacing n/216 Inch
SFCC 3
ESC 3 6–52
Skip–Over Perforation N/A ESC N 6–62
Skip–Over Perforation Cancel N/A ESC O 6–63
VFU Commands (P–Series) DLE–US N/A 6–67
Vertical Tab Set/Clear (Serial Matrix) N/A
ESC B
6–69