Filter
Top Products
Programming6–58
Print Mode/Pitch Selection (continued)
Table 6–7. Character Pitches Available by Print Mode
0(30) 1(31) 2(32)
Print
Data
Processing Correspondence
High
Speed
Mode:
10
12
13.3
15
17.1
10
12
–
10
12
13.3
m (hex):
n (hex):
0(30)
1(31)
2(32)
3(33)
4(34)
Characters per
inch:
15
–
(DP) (NLQ)
(HS) OCR–A OCR–B
10 10
5(35) 6(36)
–
–
–
–
–
–
–
–
15
17.1
NOTE: The hex values shown (i.e., 0 and 30) ar
e evuivalent.
Either value can be used in your pr
ogram expr
ession.
145 160
Barcode Barcode
––
7(37) 8(38)
–
–
12.1
–
13.3
–
–
–
NOTE:
The print mode (m) must be changed befor
e the first printable
symbol of a print line
(spaces
included) or the command sequence is deferr
ed until the next line.
NOTE: When using the Multinational character set in OCR–A or OCR–B print mode, a
unique character set is used. Refer to the Multinational Character Sets
chapter for mor
e
information.
Example Any
of the BASIC expressions listed below select the Data Processing print mode at
17.1 cpi.
where m (print mode = 0 or 30 for Data Processing; and
n (pitch) = 4 or 34 for 17.1 cpi.
CHR$(1);“X”;CHR$(0);CHR$(4);
CHR$(1);“X”;CHR$(30);CHR$(34);
CHR$(1);“X04”;