Filter
Top Products
59022-03 D 1-1
Section 1
Introduction
This manual describes the switch management tools which include the SANbox
Manager® application and the Command Line Interface (CLI). These switch
management tools support SANbox2 switches.
The SANbox Manager switch management application is the primary focus of this
manual which is organized as follows:
■ Section 1 describes the intended audience for this manual, related
materials, and technical support.
■ Section 2 describes how to use SANbox Manager, its menus, and its
displays.
■ Section 3 describes fabric management tasks.
■ Section 4 describes switch management tasks.
■ Section 5 describes port and device management tasks.
■ Appendix A describes the Command Line Interface.
A glossary of terms and an index are also provided.
1.1
Intended Audience
This manual introduces QLogic switch management products and explains their
installation and use. It is intended for users responsible for installing and using
network management tools.
1.2
Related Materials
Refer to the following manual for switch hardware and installation information:
■ SANbox2-16 Fibre Channel Switch Installation Guide, publication number
59021-03.
■ SANbox2-8c Fibre Channel Switch Installation Guide, publication number
59042-00.