Q-Logic 59022-03 D Switch User Manual


 
2 Using SANbox Manager
Setting Preferences
59022-03 D 2-9
2.6
Setting Preferences
Using the Preferences settings, you can:
Change the location of the working directory (users home directory is the
default) used to save files
Change the location of the browser used to view the online help
Choose the polling frequency. That is, how often the SANbox Manager
application polls the fabric. Rapid (default) is the normal polling level,
Intermediate is 1.5 times slower than the rapid level, and Slow is 2 times
slower than rapid level.
Enable or disable the default view file auto save and load feature. Refer to
Starting SANbox Manager on page 2-5 for more information on the default
fabric view file.
Choose the default port view when opening the faceplate display. Refer to
Monitoring Port Status on page 5-2 for more information on port views.
Figure 2-6. Preferences Window
To set user preferences for your SANbox Manager sessions, do the following:
1. Open the File menu, and select Preferences to open the Preferences
window.
2. Enter or browse for paths to the working directory and browser.
3. In the Application-wide Options area, choose the polling frequency, enable
or disable the View File Auto Save and Load feature, and choose the initial
port view when entering the faceplate display.
4. Choose the Apply button to save the changes.