Filter
Top Products
A – Command Line Interface
Set Beacon Command
59022-03 D A-23
Set Beacon Command
Assists in locating a switch by causing all port Logged-In LEDs on the switch to
flash.
Authority User
Syntax set beacon [state]
Keywords [state]
Enables or disables the flashing of the port Logged-In LEDs according to [state].
On
Enables the flashing beacon.
Off
Disables the flashing beacon.
Examples The following examples enables and disables the beacon:
SANbox2 $> set beacon on
Command succeeded.
SANbox2 $> set beacon off
Command succeeded.