3 – Managing Fabrics
Zoning a Fabric
59022-03 D 3-15
3.4.2
Using the Zoning Config Window
Use the Zoning Config window to change the Auto Save, Merge Mode, and
Default Visibility configuration parameters. In the faceplate display, open the
Zoning menu and select Edit Zoning Config to open the Zoning Config window
shown in Figure 3-3. After making changes, choose the OK button to put the new
values into effect.
Figure 3-3. Zoning Config Window
3.4.3
Restoring Default Zoning
Restoring the default zoning clears the switch of all zoning definitions.
To restore the default zoning for a switch:
1. In the faceplate display, open the Zoning menu and select Restore Default
Zoning.
2. Choose the OK button to confirm that you want to restore default zoning and
save changes to the zoning database.
CAUTION!
The use of this command will deactivate any active zone set. If
the switch is not isolated from the fabric, this command will
deactivate the active zone set for the entire fabric.