A – Command Line Interface
Show Perf Command
A-52 59022-03 D
Show Perf Command
Displays performance data for all ports.
Authority User
Syntax show perf
byte [bytes/sec]
frame [frames/sec]
Keywords byte [bytes/sec]
Displays port performance data for all ports in bytes/second. The display is
refreshed according to the interval in seconds given by [bytes/sec]. If [bytes/sec]
is omitted, the display is refreshed every second. Type “q” and press the Enter key
to stop the display.
frame [frames/sec]
Displays port performance data for all ports in frames/second. The display is
refreshed according to the interval in seconds given by [frames/sec]. If
[frames/sec] is omitted, the display is refreshed every second. Type “q” and press
the Enter key to stop the display.
Notes The Show Perf command with no keywords displays performance data in
frames/second and bytes/second at that moment.
Examples The following is an example of the Show Perf Byte command:
SANbox2 $> show perf byte
Displaying bytes/sec data... (Press ’q’ and the ENTER key to stop display)
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
-----------------------------------------------------------------------------
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0