Filter
Top Products
A – Command Line Interface
Show Setup Command
59022-03 D A-53
Show Setup Command
Displays the current SNMP and system settings.
Authority User
Syntax show setup
snmp
system
Keywords snmp
Displays the current SNMP settings.
system
Displays the current system settings.
Examples The following is an example of the Show Setup Snmp command:
SANbox2 $> show setup snmp
SNMP Information
----------------
Contact <sysContact undefined>
Location <sysLocation undefined>
Description QLogic SANBox2 FC Switch
Trap1Enabled False
Trap1Address 10.0.0.254
Trap1Port 162
Trap1Severity warning
Trap2Enabled False
Trap2Address 0.0.0.0
Trap2Port 162
Trap2Severity warning
Trap3Enabled False
Trap3Address 0.0.0.0
Trap3Port 162
Trap3Severity warning
Trap4Enabled False
Trap4Address 0.0.0.0
Trap4Port 162
Trap4Severity warning
Trap5Enabled False
Trap5Address 0.0.0.0
Trap5Port 162
Trap5Severity warning
ObjectID 1.3.6.1.4.1.1663.1.1.1.1.11
AuthFailureTrap False