Filter
Top Products
A – Command Line Interface
Show Command
A-40 59022-03 D
fabric
Displays list of each domain, fabric ID, worldwide name, node IP address, port IP
address, and symbolic name in the fabric.
intro
Displays an introductory set of information about operational attributes of the
switch. It is functionally equivalent to the Show About command.
log [option]
Displays log entries. Refer to the Show Log Command on page A-50.
lsdb
Displays Link State database information.
mem [count]
Displays information about memory activity in 1K block units. [count] is the
number of updates at 1 second intervals.
ns
Displays name server information.
perf [option]
Displays performance information for all ports. Refer to the Show Perf Command
on page A-52.
port [port_number]
Displays operational information for the port given by [port_number]. Ports are
numbered beginning with 0. If the port number is omitted, information is displayed
for all ports. Table A-11 describes the port parameters.
Table A-11. Show Port Parameters
Entry Description
AIinit Incremented each time the port begins AL initialization.
AIinitError Number of times the port entered initialization and the
initialization failed.
ClassXFramesIn Number of class x frames received by this port.
ClassXFramesOut Number of class x frames sent by this port.
ClassXWordsIn Number of class x words received by this port.
ClassXWordsOut Number of class x words sent by this port.
DecodeError Decoding error detected.