Filter
Top Products
4 – Managing Switches
Restoring the Factory Default Configuration
59022-03 D 4-17
4.10
Restoring the Factory Default Configuration
You can restore the switch and port configuration settings to the factory default
values. To restore the factory configuration on a switch, open the Switch menu
and select Restore Factory Defaults. Table 4-8 lists the factory default switch
configuration settings. Restoring the switch to the factory default configuration
does not restore the account name and password settings. You must use the
Reset Password File button in the Force PROM Mode screen. Refer to
Recovering a Switch section in the SANbox2-8c Fibre Channel Switch Installation
Guide or SANbox2 Fibre Channel Switch Installer’s/User’s Manual.
Table 4-8. Factory Default Configuration Settings
Setting Value
Chassis name SANbox2
Administrative state Online
Domain ID 1
Resource Allocation Timeout (RA TOV) 10000 milliseconds
Receiver Transmitter Timeout (RT TOV) 100 milliseconds
Error Detect Timeout (ED TOV) 2000 milliseconds
IP address 10.0.0.1
Subnet mask address 255.0.0.0
Gateway address 10.0.0.254
Boot method Static
Contact Undefined
Location Undefined
Trap address 127.0.0.1
Trap community Public
Read community Public
Write community Private
Port state Online
Port speed Auto-detect
Port mode GL