Filter
Top Products
A – Command Line Interface
Set Setup Command
59022-03 D A-37
The following is an example of the Set Setup System command:
SANbox2 $> admin start
SANbox2 (admin) #> set setup system
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the default value.
If you wish to terminate this process before reaching the end of the list
press ’q’ or ’Q’ and the ENTER key to do so.
NetworkIPAddress (dot-notated IP Address) [172.22.10.170]
NetworkIPMask (dot-notated IP Address) [255.255.252.0]
GatewayIPAddress (dot-notated IP Address) [172.22.8.254 ]
NetworkDiscovery (1=Static, 2=Bootp, 3=Dhcp, 4=Rarp) [Dhcp ]
AdminTimeout (dec value 0-1440 minutes, 0=never) [30 ]
SecurityEnable (True / False) [False ]
RemoteLogEnable (True / False) [False ]
LogHost IP Address (True / False) [False ]