Filter
Top Products
A – Command Line Interface
Zoneset Command
59022-03 D A-65
Zoneset Command
Manages zone sets and zone set membership across the fabric.
Authority Admin authority within a Zoning Edit session. Refer to the Zoning Command on
page A-67. Active, List, Zones keywords are available with User authority. You
must close the Zoning Edit session before using the Activate and Deactivate
keywords.
Syntax zoneset
active
act
ivate [zone_set]
add [zone_set] [zone_list or alias]
copy [zone_set_source] [zone_set_destination]
create [zone_set]
deact
ivate
del
ete [zone_set]
list
remove [zone_set] [zone_list or alias]
rename [zone_set_old] [zone_set_new]
zones [zone_set]
Keywords active
Displays the name of the active zone set. This keyword is available with User
authority and does not require a Zoning Edit session.
act
ivate [zone_set]
Activates the zone set given by [zone_set]. This keyword deactivates the active
zone set. Close the Zoning Edit session before using this keyword.
add [zone_set] [zone_list or alias]
Adds one or more zones given by [zone_list] to the zone set given by [zone].
[zone_list] can be an alias. This keyword requires a Zoning Edit session.
copy [zone_set_source] [zone_set_destination]
Creates a new zone set named [zone_set_destination] and copies into it the
membership from the zone set given by [zone_set_source]. This keyword requires
a Zoning Edit session.
create [zone_set]
Creates the zone set with the name given by [zone_set]. A zone set name can
have a maximum of 64 alpha-numeric characters without spaces. This keyword
requires a Zoning Edit session.
deact
ivate
Deactivates the active zone set. Close the Zoning Edit session before using this
keyword.
del
ete [zone_set]
Deletes the zone set given by [zone_set]. If the specified zone set is active, the
command is suspended until the zone set is deactivated. This keyword requires a
Zoning Edit session.