Filter
Top Products
7–Removal and Replacement
iSR6200 Chassis Blades
ISR651101-00 J 7-3
3. Remove the old blade from the chassis. Figure 7-2 shows how to release
the latch and pull down on the lever on the right side (1), and then pull
straight back on the handle (2).
Figure 7-2. Removing the Chassis Blade
Installing the Replacement Blade
Before replacing a blade for a dual-blade router installation, you must first remove
it (as described on page 7-2).
To install a replacement blade in an iSR6200 chassis with a dual blade:
1. Unlatch the lever on the new blade prior to inserting it into the chassis, as
shown in Figure 7-3.
Figure 7-3. Unlatching the Lever on the New Blade
(1)
(2)