Filter
Top Products
1–Introduction
iSR6200 Router Blades
ISR651101-00 J 1-9
iSR6240 Router Blade
The iSR6240 router blade adds two iSCSI Ethernet ports to the blade
configuration, as show in Figure 1-8. Each port has the following capacity:
Auto negotiating transmission rates of 100Mbps and 1000Mbps
Full duplex transmission mode
Support for jumbo frames (at 1000Mbps only)
RJ45 copper Ethernet connector type
iSCSI header and data digest in the hardware
IPv4 and IPv6 protocol support
iSCSI offload
Figure 1-8. iSCSI (GE) Ports on the iSR6240 Router Blade
Router Blade LEDs
Each chassis blade provides LEDs and connectors that face the front of the
chassis and may also provide expansion ports, depending on its model. The
router blade LEDs shown in Figure 1-9 provide information about the router’s
operational status. These LEDs include the heartbeat LED, the system fault LED,
and the input power LED. The blade also includes a recessed beacon indicator
used to locate the physical blade monitored using SANsurfer Router Manager.
Figure 1-9. Router Blade LEDs
Heartbeat LED (Green)
The heartbeat LED blinks once per second as long the router firmware is
operational.
Activity Link Status
MGMT IOIOI
FC1 FC2 GE1 GE1
GE4 GE3 iSR6240
Intelligent Storage Router
iSR6200 System
10GbE1 iSR6250
Intelligent Storage Router
10GbE2
Beacon IndicatorHeartbeat LED System Fault LED Power LED