Filter
Top Products
7–Removal and Replacement
iSR6200 Chassis Blades
7-8 ISR651101-00 J
Installing the Replacement Blade
Before replacing a blade for a single-blade router installation, you must first
remove it (as described on page 7-5).
To install a replacement blade in an iSR6200 chassis with a single blade:
1. Unlatch the lever on the new blade prior to inserting it into the chassis, as
shown in Figure 7-7.
Figure 7-7. Unlatching the Lever on the New Blade
2. Insert the new blade into the chassis slot. Figure 7-8 shows how to push the
blade straight into the chassis (1), seat the blade onto the chassis mid-plane
by pushing the right side lever up, and then latching it into place (2). The
blade powers on and boots up.
Figure 7-8. Inserting the New Blade into the Chassis Slot
(1)
(2)