Filter
Top Products
1–Introduction
iSR6200 Router Blades
ISR651101-00 J 1-13
Resets the maintenance port IP address to 10.0.0.1
Disables the iSCSI ports and sets the IP address to 0.0.0.0
Erases all presentations
Erases all discovered initiators and targets
Fibre Channel Port LEDs
The iSR6200 router has two Fibre Channel ports. The ports are labeled FC1 and
FC2, as shown in Figure 1-11.
Figure 1-11. Fibre Channel LEDs
The port LEDs are located to the right of their respective ports and provide status
and activity information.
Each port has three LEDs:
The amber (top) LED shows activity for data passing through the port at
2Gbps speed.
The green LED (middle) shows activity for data passing through the port at
4Gbps speed.
The yellow LED (bottom) shows activity for data passing through the port at
8Gbps speed.
Table 1-4 describes the port LED blink patterns and their meanings.
Table 1-4. Port LEDs
Activity
Yellow LED
(8Gbps)
Green LED
(4Gbps)
Amber LED
(2Gbps)
Power OFF OFF OFF OFF
Power ON
(before firmware initializa-
tion)
ON ON ON
Power ON
(after firmware initialization)
Flashing Flashing Flashing
MGMT IOIOI
FC1 FC2 GE1 GE1
GE4 GE3 iSR6240
Intelligent Storage Router
iSR6200 System
10GbE1 iSR6250
Intelligent Storage Router
10GbE2
2Gb (Amber) 4Gb (Green) 8Gb (Yellow)