Q-Logic 6200 SERIES Network Router User Manual


 
1–Introduction
iSR6200 Router Blades
1-8 ISR651101-00 J
iSR6250 Router Blade
The iSR6250 router blade adds two 10Gb Ethernet (GbE) ports to the blade
configuration, as shown in Figure 1-7. Each port has the following capacity:
10GbE iSCSI ports that run in full duplex mode
Support for jumbo frames
IPv4 and IPv6 protocol support
iSCSI header and data digest in the software
Figure 1-7. 10GbE Ports on the iSR6250 Router Blade
Table 1-2 describes the 10GbE Port LED scheme.
Table 1-2. 10GbE Port LED Scheme
Green LED
(SAN Traffic
a
)
a
SAN traffic refers to FCoE traffic.
Green LED
(LAN Traffic)
Activity
Off Off Power off
Slow flashing
(in unison)
Slow flashing
(in unison)
Power on (no link)
On On Link established, no activity
On Flashing Link established, transmit and receive
LAN only activity
Flashing On Link established, transmit and receive
SAN only activity
Flashing Flashing Link established, transmit and receive
LAN and SAN activity
Slow flashing
(alternating)
Slow flashing
(alternating)
Beaconing
SAN (Green)
LAN (Green)