Filter
Top Products
7–Removal and Replacement
iSR6200 Chassis Blades
ISR651101-00 J 7-9
3. Wait until the blade finishes booting up.
The system runs the POST. The heartbeat and system fault LEDs show the
operational status of the router. When the POST completes with no errors,
these LEDs blink at a steady rate of once per second.
4. Connect to the blade’s Ethernet management interface to your computer.
5. Open a command line, change to the directory that contains your FRU file,
and then enter ftp 10.0.0.1. For both the user name and password, use
ftp. Remember to enter the bin command before you enter the put
command. For example:
>ftp 10.0.0.1
Connected to 10.0.0.1.
220 (vsFTPd 2.0.5)
User (10.0.0.1:(none)):
ftp
331 Please specify the password.
Password:
ftp
230 Login successful.
ftp>
bin
200 Switching to Binary mode.
ftp> put iSR6200_FRU.bin
200 PORT command successful. Consider using PASV.
150 Ok to send data.
226 File receive OK.
ftp: 20010 bytes sent in 0.00Seconds 20010000.00Kbytes/sec.
ftp>
bye
221 Goodbye.
10: Telnet to 10.0.0.1, and run the ‘fru restore’ command.
iSR6200 login:
guest
Password: ****** (default is password)
******************************************************
* *
* iSR6200 *
* *
******************************************************
iSR6200 #>
blade 1
iSR6200 <1> #> admin start