Filter
Top Products
1–Introduction
iSR6200 Router Blades
ISR651101-00 J 1-15
Gigabit Ethernet Port LEDs
The gigabit Ethernet (GbE) ports shown in Figure 1-12 are RJ45 connectors that
provide connection to an Ethernet SAN through a 100 or 1000 Base-T Ethernet
cable. The ports are labeled GE1 and GE2. Each of these ports supports
connections that run the iSCSI high-level TCP protocol.
Figure 1-12. Gigabit Ethernet Ports
GbE ports each have two LEDs:
The activity LED (green) lights up when the port transmits or receives data
over the Ethernet connection.
The link status LED (green) lights up continuously when the port establishes
an Ethernet connection.
Ethernet Port—Management
The management Ethernet port shown in Figure 1-13 is an RJ45 connector that
provides a connection to a management workstation through a 10 or 100 Base-T
Ethernet cable. The port is labeled MGMT.
Figure 1-13. Ethernet Management Port
A management workstation can be a Windows
®
, Solaris
®
, or a Linux
®
workstation
that configures and manages the router. You can manage the router over an
Ethernet connection using either SANsurfer Router Manager, the CLI, or SNMP.
MGMT IOIOI
FC1 FC2 GE1 GE1
GE4 GE3 iSR6240
Intelligent Storage Router
iSR6200 System
10GbE1 iSR6250
Intelligent Storage Router
10GbE2
Activity Link Status
MGMT IOIOI
FC1 FC2 GE1 GE1
GE4 GE3 iSR6240
Intelligent Storage Router
iSR6200 System
10GbE1 iSR6250
Intelligent Storage Router
10GbE2
Activity
Link Status