Q-Logic 6200 SERIES Network Router User Manual


 
4–Configuration
Zoning Virtual Port Groups on the SAN
ISR651101-00 J 4-9
Zoning Virtual Port Groups on the SAN
When zoning the iSR6200 virtual port group WWPNs to a Fibre Channel array,
you must ensure all WWPNs of a virtual port group are zoned to any single Fibre
Channel target WWPN. Figure 4-5 shows the proper zoning for a single blade
iSR6200 with three VP groups enabled using a single Fibre Channel switch.
Figure 4-5. Single Blade, Single Fibre Channel Switch
SAN A
iSR6200
FC Target Array
Blade 1
21:00:00:c0:dd:13:16:f8
21:01:00:c0:dd:13:16:f8
21:02:00:c0:dd:13:16:f8
21:00:00:c0:dd:13:16:f8
21:01:00:c0:dd:13:16:f8
21:02:00:c0:dd:13:16:f8
FC1
FC2
FC1 A0
A1
B0
B1
Controller A
Controller B
FC2
FC1
FC2
Zone 6200 FC_One
SAN A
A1
B0
Zone 6200 FC_Two
A0
B1
21:00:00:c0:dd:13:16:f9
21:01:00:c0:dd:13:16:f9
21:02:00:c0:dd:13:16:f9
21:00:00:c0:dd:13:16:f9
21:01:00:c0:dd:13:16:f9
21:02:00:c0:dd:13:16:f9
21:00:00:c0:dd:13:16:f9
21:01:00:c0:dd:13:16:f9
21:02:00:c0:dd:13:16:f9