Q-Logic 6200 SERIES Network Router User Manual


 
C–Log Messages
C-26 ISR651101-00 J
139305 QBRPC_Initialize:LunList MemAlloc error User Error Failed memory allocation for LUN List API.
139315 QBRPC_FreeResources:Entered User Error RPC free resources entry point.
139553 checkDuplicateIp: Detected
Error %08x %08x%04x
User Error Detected duplicate IP address for management port.
139930 FcipRoute#%d Failed with Memory
Allocation Error
User Error Memory resources could not be allocated to an FCIP
route. The route was not created. The router must be
rebooted to clear this error.
139931 FcipRoute#%d Failed with Invalid Arg Error User Error Invalid argument specified by user. The preceding
message in the log indicates which parameter is in
error.
139932 FcipRoute#%d Failed with Unknown Device
Error
User Error Specified route or port (Fibre Channel or Ethernet)
does not exist. Verify that the value entered is a valid
value.
139933 FcipRoute#%d Failed with Kernel Error User Error Invalid memory address was encountered while
reading/writing or modifying FCIP route definition.
Reboot the router.
139934 FcipRoute#%d Failed with Network
Configuration Error
User Error Network device configuration failed; could not add or
remove a network device instance. Verify the IP
addresses, mask, gateway, and Ethernet port speci-
fied in the route definition
139935 FcipRoute#%d Failed with Persistence Read
Failure
User Error Read of FCIP Route definition from persistent mem-
ory failed. Reboot the router
Table C-1. iSR6200 Router Log Messages (Continued)
ID Log Message
Module
Type
Msg.
Type
Description