Filter
Top Products
Riverstone Networks RS Switch Router User Guide Release 8.0 9-9
Packet-over-SONET Configuration Guide Example Configurations
9.6.4 Bridging and Routing Traffic Over a PoS Link
The following example shows how to configure a VLAN ‘v1’ that includes the PoS ports on two connected RS’s,
router A and router B. Bridged or routed traffic is transmitted over the PoS link.
Figure 9-4 VLAN with PoS links
The following is the configuration for router A:
The following is the configuration for router B:
9.6.5 PoS Link Through a Layer 2 Cloud
The following example shows a PoS link between Router A and Router B. Both routers are connected by a PPP
connection that goes through a L2 cloud, a Layer 2 switch.
port set so.7.1 mtu 65535
stp enable port so.7.1
vlan create v1 port-based id 10
vlan add ports so.7.1,gi.3.1 to v1
interface create ip int1 address-netmask 1.1.1.1/8 vlan v1
port set so.6.1 mtu 65535
stp enable port so.6.1
vlan create v1 port-based id 10
vlan add ports so.6.1,gi.5.1 to v1
interface create ip int1 address-netmask 1.1.1.2/8 vlan v1
Router
A
Router
B
so.7.1
so.6.1
int1
1.1.1.1/8
int1
1.1.1.2/8
gi.3.1 gi.5.1
Router
A
Router
B
so.6.1
so-1
40.1.1.1/16
et.2.1
50.1.1.2/16
L2 Ethernet Cloud
Layer 3
Bridged Encapsulation