Filter
Top Products
Riverstone Networks RS Switch Router User Guide Release 8.0 5-35
Bridging Configuration Guide Tunneling VLAN packets across MANs
The following is the configuration for R2:
5.12.3 Displaying Stackable VLAN Information
Use the
vlan show stackable-vlan
command to display the configuration of stackable VLANs on the RS. For
example:
! Create backbone VLAN
vlan create RED port-based
! Create customer VLANs
vlan create BLUE port-based
vlan create GREEN port-based
vlan create PINK port-based
vlan create PURPLE port-based
vlan create AQUA port-based
! Make et.6.1 an access port that can belong to > 1 VLAN
vlan make access-port et.6.1 stackable-vlan
! Add ports to VLANs
vlan add ports et.6.1 to BLUE
vlan add ports et.6.1 to GREEN
vlan add ports et.6.1 to PINK
vlan add ports et.6.1 to PURPLE
vlan add ports et.6.1 to AQUA
! Add port to backbone VLAN
vlan add ports et.5.1 to RED
! Make et.5.1 both a trunk port and a tunnel backbone port
vlan make trunk-port et.5.1 stackable-vlan
! Map tunnel entry ports to backbone VLAN
vlan enable stackable-vlan on et.6.1 backbone-vlan RED
rs# vlan show stackable-vlan
Stackable VLAN Information
==========================
(20, 222):
Applied On: et.6.1
Flooded On: et.3.8,et.6.1
Stackable VLAN Trunk Ports: et.3.8
Stackable VLAN Access Ports: