Filter
Top Products
Riverstone Networks RS Switch Router User Guide Release 8.0 28-9
RMON Configuration Displaying RMON Information
•
Rising and falling event index values are 15, which will trigger the previously-configured Event.
28.4 DISPLAYING RMON INFORMATION
The CLI
rmon show
commands allow you to display the same RMON statistics that can be viewed from a
management station. To display RMON statistics for the RS, use the following CLI command lines in Enable mode:
rs#(config)
rmon alarm index 20 variable 1.3.6.1.2.1.31.1.5.0 interval 300
startup both type absolute-value rising-threshold 1 falling-threshold 1
rising-event-index 15 falling-event-index 15 owner "help desk"
1
To show Ethernet statistics.
rmon show etherstats
<port-list>
|all-ports
To show all events and logs.
rmon show events
To show all alarms.
rmon show alarms
To show histories and logs.
rmon show history
<port-list>
|all-ports
To show hosts and logs.
rmon show hosts
<port-list>
|all-ports [summary]
To show all Host Top N and logs.
rmon show host-top-n
To show matrices and logs.
rmon show matrix
<port-list>
|all-ports
To show all channels.
rmon show channels
To show all filters.
rmon show filters
To show all packet captures and logs.
rmon show packet-capture
To display the RMON 2 Protocol Directory.
rmon show protocol-directory
To display the RMON 2 Protocol
Distribution.
rmon show protocol-distribution
<port-list>
|all-ports
To display the RMON 2 Address Map table.
rmon show address-map
<port-list>
|all-ports
To show Network Layer Host logs.
rmon show nl-host
<port-list>
|all-ports [summary]
To show Application Layer Host logs.
rmon show al-host
<port-list>
|all-ports [summary]
To show Network Layer Matrix logs.
rmon show nl-matrix
<port-list>
|all-ports [order-by
srcdst|dstsrc] [summary]
To show Application Layer Matrix logs.
rmon show al-matrix
<port-list>
|all-ports [order-by
srcdst|dstsrc] [summary]
To show all Network Layer Matrix Top N.
rmon show nl-matrix-top-n
To show all Application Layer Matrix Top N.
rmon show al-matrix-top-n