Filter
Top Products
Riverstone Networks RS Switch Router User Guide Release 8.0 15-17
IS-IS Configuration Guide Displaying IS-IS Information
R5 Configuration
The following is the configuration for R5 in Area 2:
R5(config)# sh
Running system configuration:
!
! Last modified from Console on 2000-07-06 09:31:01
!
To set WAN encapsulation for port hs.5.1:
1 : port set hs.5.1 wan-encapsulation ppp speed 45000000 clock
internal-clock-51mhz
!
To create IP interfaces:
2 : interface create ip 35net port et.1.8 address-netmask 35.1.1.2/16
3 : interface create ip 100net address-netmask 100.1.1.2/8 port hs.5.1
4 : interface create ip 30net address-netmask 30.1.1.1/16 port et.1.2
5 : interface create ip 105net address-netmask 105.1.1.2/16 port et.1.3
6 : interface add ip en0 address-netmask 10.50.3.4/16
!
To set BGP parameters:
7 : ip-router global set router-id 30.1.1.1
8 : ip-router global set autonomous-system 64977
!
9 : ip add route 100.100.100.100 interface 35net
!
10 : bgp create peer-group bgpfeed type external autonomous-system 64901
11 : bgp add peer-host 35.1.1.1 group bgpfeed
12 : bgp start
!
To configure the IS-IS area:
13 : isis add area 49.da02
To enable IS-IS on each interface:
14 : isis add interface 100net
15 : isis add interface 30net
16 : isis add interface 105net
To set parameters for each interface:
17 : isis set interface 100net level 2 encap iso priority 10 metric 10
18 : isis set interface 30net level 2 encap iso priority 10 metric 10
19 : isis set interface 105net level 2 encap iso priority 10 metric 10
To set the IS-IS level of router R5:
20 : isis set level 1-and-2
To start IS-IS on R5:
21 : isis start
!
To redistribute static routes into IS-IS:
22 : ip-router policy redistribute from-proto static to-proto isis
To redistribute BGP routes into IS-IS:
23 : ip-router policy redistribute from-proto bgp to-proto isis source-as 64901
!