Filter
Top Products
Riverstone Networks RS Switch Router User Guide Release 8.0 30-87
WAN Configuration Scenarios for Deploying Clear Channel T3 and E3
The following configuration applies to the T1 interfaces on the RS 8000 router at the head office, hqsite.
!-----------------------------------------------------------------------------
!Configuration for the RS 8000 T1 interfaces
!-----------------------------------------------------------------------------
!T1 interfaces to the ISP:
!-----------------------------------------------------------------------------
port set t1.5.(1-4) framing esf lbo -7.5db
port set t1.5.(1-4):1 timeslots 1-24 wan-encapsulation ppp
port set t1.6.(1-4) framing esf lbo -7.5db
port set t1.6.(1-4):1 timeslots 1-24 wan-encapsulation ppp
port set t1.7.(1-4) framing esf lbo -7.5db
port set t1.7.(1-4):1 timeslots 1-24 wan-encapsulation ppp
port set t1.8.(1-4) framing esf lbo -7.5db
port set t1.8.(1-4):1 timeslots 1-24 wan-encapsulation ppp
port set t1.9.(1-4) framing esf lbo -7.5db
port set t1.9.(1-4):1 timeslots 1-24 wan-encapsulation ppp
port set t1.10.(1-4) framing esf lbo -7.5db
port set t1.10.(1-4):1 timeslots 1-24 wan-encapsulation ppp
ppp create-mlp mp.9 slot 5
ppp add-to-mlp mp.9 port t1.5.(1-4):1
interface create ip to_rsite2 address-netmask 120.210.2.1/24 port mp.9 up
ppp create-mlp mp.10 slot 6
ppp add-to-mlp mp.10 port t1.6.(1-4):1
interface create ip to_rsite3 address-netmask 120.210.3.1/24 port mp.10 up
ppp create-mlp mp.11 slot 7
ppp add-to-mlp mp.11 port t1.7.(1-4):1
interface create ip to_rsite4 address-netmask 120.210.4.1/24 port mp.11 up
ppp create-mlp mp.12 slot 8
ppp add-to-mlp mp.12 port t1.8.(1-4):1
interface create ip to_rsite5 address-netmask 120.210.5.1/24 port mp.12 up
ppp create-mlp mp.13 slot 9
ppp add-to-mlp mp.13 port t1.9.(1-4):1
interface create ip to_rsite6 address-netmask 120.210.6.1/24 port mp.13 up
ppp create-mlp mp.14 slot 10
ppp add-to-mlp mp.14 port t1.10.(1-4):1
interface create ip to_rsite7 address-netmask 120.210.7.1/24 port mp.14 up
!-----------------------------------------------------------------------------
!Configure RIP:
!-----------------------------------------------------------------------------
rip add interface to_rsite2
rip add interface to_rsite3
rip add interface to_rsite4
rip add interface to_rsite5
rip add interface to_rsite6
rip add interface to_rsite7
rip start