Filter
Top Products
30-54 Riverstone Networks RS Switch Router User Guide Release 8.0
Scenarios for Deploying Channelized T1, E1 and T3 WAN Configuration
The following configuration applies to the T1 interfaces on the RS 8600 router at the head office, hqsite.
!-----------------------------------------------------------------------------
!Configuration for the RS 8600 T1 interfaces
!-----------------------------------------------------------------------------
!T1 interfaces to the ISP:
!-----------------------------------------------------------------------------
port set t1.5.(1-4) framing esf lbo -7.5db
port set t1.5.(1-4):1 timeslots 1-24 wan-encapsulation ppp
port set t1.6.(1-4) framing esf lbo -7.5db
port set t1.6.(1-4):1 timeslots 1-24 wan-encapsulation ppp
port set t1.7.(1-4) framing esf lbo -7.5db
port set t1.7.(1-4):1 timeslots 1-24 wan-encapsulation ppp
port set t1.8.(1-4) framing esf lbo -7.5db
port set t1.8.(1-4):1 timeslots 1-24 wan-encapsulation ppp
port set t1.9.(1-4) framing esf lbo -7.5db
port set t1.9.(1-4):1 timeslots 1-24 wan-encapsulation ppp
port set t1.10.(1-4) framing esf lbo -7.5db
port set t1.10.(1-4):1 timeslots 1-24 wan-encapsulation ppp
ppp create-mlp mp.9 slot 5
ppp add-to-mlp mp.9 port t1.5.(1-4):1
interface create ip to_rsite2 address-netmask 120.210.2.1/24 port mp.9 up
ppp create-mlp mp.10 slot 6
ppp add-to-mlp mp.10 port t1.6.(1-4):1
interface create ip to_rsite3 address-netmask 120.210.3.1/24 port mp.10 up
ppp create-mlp mp.11 slot 7
ppp add-to-mlp mp.11 port t1.7.(1-4):1
interface create ip to_rsite4 address-netmask 120.210.4.1/24 port mp.11 up
ppp create-mlp mp.12 slot 8
ppp add-to-mlp mp.12 port t1.8.(1-4):1
interface create ip to_rsite5 address-netmask 120.210.5.1/24 port mp.12 up
ppp create-mlp mp.13 slot 9
ppp add-to-mlp mp.13 port t1.9.(1-4):1
interface create ip to_rsite6 address-netmask 120.210.6.1/24 port mp.13 up
ppp create-mlp mp.14 slot 10
ppp add-to-mlp mp.14 port t1.10.(1-4):1
interface create ip to_rsite7 address-netmask 120.210.7.1/24 port mp.14 up
!-----------------------------------------------------------------------------
!Configure RIP:
!-----------------------------------------------------------------------------
rip add interface to_rsite2
rip add interface to_rsite3
rip add interface to_rsite4
rip add interface to_rsite5
rip add interface to_rsite6
rip add interface to_rsite7
rip start