Filter
Top Products
Riverstone Networks RS Switch Router User Guide Release 8.0 18-25
Routing Policy Configuration Configuring Advanced Routing Policies
Exporting a Given Static Route to All RIP Interfaces
Router R1 has several static routes, of which one is the default route. We would export this default route over all RIP
interfaces.
1.
Create a RIP export destination since we would like to export routes into RIP.
2.
Create a Static export source since we would like to export static routes.
As mentioned above, if no export policy is specified, RIP and interface routes are exported into RIP. If any policy
is specified, the defaults are overridden; it is necessary to explicitly specify everything that should be exported.
Since we would also like to export/redistribute RIP and direct routes into RIP, we would also create export-sources
for those protocols.
3.
Create a RIP export source since we would like to export RIP routes.
4.
Create a Direct export source since we would like to export direct/interface routes.
! RIP Interface Configuration. Create a RIP interfaces, and set
! their type to (version II, multicast).
!++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
rip add interface to-r41
rip add interface to-r42
rip add interface to-r6
rip set interface to-r41 version 2 type multicast
rip set interface to-r42 version 2 type multicast
rip set interface to-r6 version 2 type multicast
ip-router policy create rip-export-destination ripExpDst
ip-router policy create static-export-source statExpSrc
ip-router policy create rip-export-source ripExpSrc
ip-router policy create direct-export-source directExpSrc