Riverstone Networks WICT1-12 Network Router User Manual


 
Riverstone Networks RS Switch Router User Guide Release 8.0 27-1
27 PERFORMANCE MONITORING
The RS is a full wire-speed layer-2, 3 and 4 switching router. As packets enter the RS, layer-2, 3, and 4 flow tables
are populated on each line card. The flow tables contain information on performance statistics and traffic
forwarding. Thus the RS provides the capability to monitor performance at Layer 2, 3, and 4.
Layer-2 performance information is accessible to SNMP through MIB-II and can be displayed by using the
l2-tables
command in the CLI. Layer-3 and 4 performance statistics are accessible to SNMP through
RMON/RMON2 and can be displayed by using the
statistics show
command in the CLI. In addition to the
monitoring commands listed, you can find more monitoring commands listed in each chapter of the Riverstone RS
Switch Router Command Line Interface Reference Manual.
To access statistics on the RS, enter the following commands in Enable mode:
Show DVMRP routes.
dvmrp show routes
Show all TCP/UDP connections and services.
ip show connections
Show all IP routes.
ip show routes
Show all IPX routes.
ipx show tables routing
Show all MAC addresses currently in the L2 tables.
l2-tables show all-macs
Show info about MACs residing in a port's L2 table.
l2-tables show port-macs
SRUWOLVW!
Show all L2 flows (for ports in flow-bridging mode.
l2-tables show all-flows
Show information about the master MAC table.
l2-tables show mac-table-stats
Show information about a particular MAC address.
l2-tables show mac
Show info about multicasts registered by IGMP.
l2-tables show igmp-mcast-registrations
Show whether IGMP is on or off on a VLAN.
l2-tables show vlan-igmp-status
Show info about MACs registered by the system.
l2-tables show bridge-management
Show SNMP statistics.
snmp show statistics
Show ICMP statistics.
statistics show icmp
Show IP interface's statistics.
statistics show ip
Show unicast routing statistics.
statistics show ip-routing
Show IPX statistics.
statistics show ipx
Show IPX interface's statistics.
statistics show ipx-interface
Show IPX routing statistics.
statistics show ipx-routing