Filter
Top Products
23-8 Riverstone Networks RS Switch Router User Guide Release 8.0
Monitoring an IPX Network IPX Routing Configuration
Creating an IPX RIP Access Control List
IPX RIP access control lists control which RIP updates are allowed. To create an IPX RIP access control list, perform
the following task in the Configure mode:
Once an IPX RIP access control list has been created, you must apply the access control list to an IPX interface. To
apply an IPX RIP access control list, enter the following command in Configure mode:
23.6 MONITORING AN IPX NETWORK
The RS reports IPX interface information and RIP or SAP routing information.
To display IPX information, enter the following command in Enable mode:
23.7 CONFIGURATION EXAMPLES
This example performs the following configuration:
•
Creates IPX interfaces
•
Adds static RIP routes
•
Adds static SAP entries
Create an IPX RIP access control list.
acl
<name> permit|deny ipxrip <FromNetwork>
<ToNetwork>
Apply an IPX RIP access control list.
acl
<name>
apply interface
<Interface Name>
input|output [logging [on|off]]
Show a RIP entry in the IPX RIP table.
ipx find rip
<DstNetwork>
Show a SAP entry in the IPX SAP table.
ipx find sap
<type>
<ServiceType>
<ServiceName>
<ServerNetwork>
Show IPX interface information.
ipx show interfaces
<interface-name>
Show IPX RIP table.
ipx show tables rip
Show IPX routing table.
ipx show tables routing
Show IPX SAP table.
ipx show tables sap
Show IPX RIP/SAP table summary.
ipx show tables summary