Filter
Top Products
111
On Screen Messages
Appendix
Name is not translated to IP address (DNS
error). Check LAN configuration.
Check the DNS settings.
Reference to DNS has failed. Check LAN
configuration.
When using a domain name server, the name for the remote party was entered,
but LAN connection could not be established. Enter the IP address and dial again.
Now upgrading. Wait for a while. The LCD software version is being upgraded. Do not turn power off until the
upgrade process is completed.
Wrong password. Enter the correct password.
Check the user name or user number for
dialing is correct.
Enter the correct user name and user number.
Busy line - Connection not possible. Cannot connect because remote party is busy.
File error. There is a problem with the file.
File size error. The file size allocation is wrong.
File decode error. A JPEG file could not be decoded.
Format error. The “Memory Stick” could not be formatted.
Unknown device is connected. An unknown device has been connected to the mouse port.
Unknown network error: Try again later. Try dialing once more.
Use of the Private Phone Book is available. A “Memory Stick” containing Private Phone Book data was inserted. The Private
Phone Book function can be used.
Use of the Private Phone Book is not
available.
A “Memory Stick” containing Private Phone Book data was removed. The Private
Phone Book function can no longer be used.
Preset 1 (- 6) selected. Camera angle and zoom has been changed to the settings stored in preset
number 1 (- 6).
Registered to Preset number 1 (- 6). Camera angle and zoom settings have been stored in preset number 1 (- 6).
The presentation screen will not be sent. The current presentation screen cannot be handled by the DSM. Set the PC
screen resolution to XGA or lower.
White balance adjustment will be
performed. Press the “Start” button and wait
a few moments.
The white balance can be adjusted manually.
Microphone is turned off. The microphone cannot be used.
Microphone is turned on. The microphone can be used.
Mouse detected. Mouse is connected to the Video Communication System.
No mouse is detected. Mouse is not connected or connected to the PC side.
Memory Stick file decode error. A JPEG file on the “Memory Stick” could not be decoded.
Memory Stick error. The “Memory Stick” format is different.
Memory Stick file error. The “Memory Stick” file format is different, or the file is damaged.
Memory Stick file size error. The “Memory Stick” file size allocation is wrong.
No Memory Stick. No “Memory Stick” is inserted.
Memory Stick write-protected. Change the position of the LOCK slider on the rear of the “Memory Stick”.
There are no images recorded in the
Memory Stick.
No image files are stored on the Memory Stick.
Memory Stick full. There is not enough free capacity on the “Memory Stick”.
Memory full. The “Flash Memory” does not have enough free space.
The cooling fan is malfunctioning. There is a problem with the cooling fan.
Registration failed The synchronization with the SIP server failed.
Registration Confirmed The synchronization with the SIP server is established.
Router is not supported. Make sure that you are using a router that is supported and that the router settings
are correct.
Confirm the router’s port settings. Check the router settings.
Authentication error. Check that the
password is correct.
Check the password.
Authentication error. Check that the ID is
correct.
Check the ID.
The dialed party does not exist. Check that
the number is correct.
Check the remote party’s settings.
The call request has timed out. Cannot connect due to a problem with the network or the remote party not
answering within a specific time.
Message Meaning