31
Registering Local Information
Chapter 2
Registration and Setup
“SIP: No-Video” is only enabled when the optional PCSA-
SP1 SIP software is installed.
Video Frame
Select the receive video frame rate.
Auto: The frame rate adjusts automatically.
15fps: Receive CIF format video at a maximum rate of 15
frames per second.
30fps: Receive CIF format video at a maximum rate of 30
frames per second.
Audio Mode
Select an audio compression method for reception.
Auto: Match the audio mode selected at the far-end
system.
MPEG4 Audio: Use MPEG4 compliant compression.
G.722: Use G.722 compliant compression.
G.729: Use G.729 compliant compression.
G.728: Use G.728 compliant compression.
G.711: Use G.711 compliant compression.
If the far-end videoconferencing system does not support
the audio compression method selected at the PCS-TL33,
the G.711 method will automatically be used.
LAN Bandwidth
Select the bandwidth to be used for reception.
Available settings are 64 kbps, 128 kbps, 256 kbps, 384
kbps, 512 kbps, 768 kbps, 1024 kbps, 1536 kbps, 2048
kbps, and “User Input”.
Input LAN Bandwidth
When “User Input” was selected for “LAN Bandwidth”,
enter the bandwidth value here.
Far End Camera Control
Select whether to enable far-end camera control.
On: Normally this setting should be selected, to allow
control of the far-end camera.
Off: Disable control of the far-end camera.
H.239 (Presentation)
Select whether to use the H.239 compliant presentation
function.
On: Enables use of the H.239 compliant presentation
function.
Off: Disables use of the H.239 compliant presentation
function.
Page 3/3
Encryption via LAN
Select whether to use the encryption feature.
On: Use the LAN encryption feature. When “On” is
selected, you must set the encryption protocol,
connection method, and encryption password.
Off: Do not use the LAN encryption feature.
Encryption Protocol
Select the type of encryption protocol.
Standard: Use standard encryption.
Proprietary: Use Sony proprietary encryption.
Connectivity Prioritization
Select the connectivity method.
Connection: The connection is given priority. For
terminals without LAN encryption capability or
terminals where “Encryption via LAN” is set to “Off”,
conduct a videoconference without encryption.
Encryption: The encryption is given priority. For
terminals without LAN encryption capability or
terminals where “Encryption via LAN” is set to “Off”,
a videoconference cannot be conducted.
Encryption Password
When “Proprietary” has been selected, a password must be
set to enable holding a videoconference using LAN
encryption.
The password must be 13 - 20 characters long.
When “Proprietary” has been selected, it will not be
possible to connect to the following types of terminals:
terminals without LAN encryption capability, terminals
where “Encryption via LAN” is set to “Off”, terminals
where a different password is set.
Note
Note
Note
Communication
Right-click the mouse to display a help message.
CancelOK
3/3
Standard
Connection
On
Encryption via LAN
Encryption Protocol
Connectivity Prioritization
Encryption Password
Off
IP:012.345.678.912