Filter
Top Products
76
Using Video From Connected Equipment for a Conference
Chapter 5 Data Conference Using Data Solution Module
When the PCS-1/1P, PCS-G70/G70P, or PCS-G50/G50P is used as a receiving terminal
For the settings for output of the picture from each output connector, see the Operating Instructions supplied with the PCS-
1/1P, PCS-G70/G70P, or PCS-G50/G50P.
When the PCS-11/11P is used as a receiving terminal
When other videoconferencing system such as the PCS-1600 is used
Monitor used to
display the picture
of the Data
solution Box
Output connector
for a computer
picture on
receiving terminal
Resolution Video
frame
rate
Picture quality
VIDEO OUT 1 or
VIDEO OUT 2
VIDEO OUT 1 or
VIDEO OUT 2 on
the communication
terminal
aa
Outputs the signal by converting a transmitted VGA,
SVGA or XGA signal into a 4CIF signal. The original high-
resolution picture cannot be obtained and details cannot
be clearly seen. The number of frames displayed per
second depends on the interface transmission rate. For
example, one frame per second is obtained at 1 Mbps.
RGB OUT RGB OUT on the
communication
terminal
a
Outputs the signal by converting a transmitted VGA,
SVGA or XGA signal into an XGA signal. The high-
resolution picture can be obtained. The number of frames
displayed per second depends on the interface
transmission rate. For example, one frame per second is
obtained at 1 Mbps.
DSB RGB OUT on the
PCSA-DSB1S (only
when the PCSA-
DSB1S is enabled)
Outputs the signal by converting a transmitted VGA,
SVGA or XGA signal into an XGA signal. The high-
resolution picture can be obtained. You can view more
vivid picture than the picture output from the RGB OUT
connector on the Communication Terminal. The number of
frames displayed per second depends on the interface
transmission rates. For example, five frames per second is
obtained at 1 Mbps (three frames per second with a XGA
transmission).
: High, a: Middle, f: Low
Resolution Video
frame rate
Remarks
aa Outputs the signal by converting a transmitted VGA, SVGA or XGA signal into a 4CIF signal. The
original high-resolution picture cannot be obtained and details cannot be clearly seen. The number
of frames displayed per second depends on the interface transmission rate. For example, one frame
per second is obtained at 1 Mbps.
: High, a: Middle, f: Low
Resolution Video
frame rate
Remarks
af Sends and receives the pictures in 4CIF, and the original high-resolution picture cannot be obtained
and detailed portion cannot be clearly seen. The number of frames displayed per second depends
on the interface transmission rates. For example, one frame per several seconds is obtained.
: High, a: Middle, f: Low