Sony PCS-TL33 Webcam User Manual


 
14
Names and Functions of Parts
Chapter 1 Installation and Preparation
e PC port
This connector is used when the same mouse is to be used
for the PCS-TL33 and for a computer connected to the
RGB IN connector. Link the connector to a USB port on
the computer.
Use a USB cable that is 3 m (10 ft.) or shorter.
f RS-232C port (9-pin D-sub connector)
This connector is used only for servicing the system.
g Mouse port
Connect the supplied optical mouse PCS-RMU1 here.
Indicator Names and Functions
* The indicator is lit while the system is starting up. If abnormal temperature
is detected, the indicator flashes and power turns off.
PCSA-DSM1 Data Solution Module
(Optional)
a Fastening screws
Used to secure the unit to the PCS-TL33.
b Monitor connector
Used to connect the unit to the PCS-TL33.
c RGB Output connector
Used to connect the unit to an external device, such as a
projector.
A commercially available RGB cable is required to use
this connector.
For information about installation in the PCS-TL33, see
“Installing the Data Solution Module” on page 72.
Note
Indicator Status Meaning
(Power) *
Lit green Power is on
Lit orange Standby
Flashing orange (1-
second cycle)
Problem with fan
Out Power is off
Online * Flashing blue
(3 times per sec.)
Sending/receiving
Blue illumination lit Communication in
progress
Out Offline (no missed call) or
standby
(PC) *
Lit blue Computer display
Lit white Videoconference display
Out Standby
(Videocon-
ference) *
Lit blue Videoconference display
Lit white Computer display
Out Standby
(Mic off) *
Lit orange Mic off
Lit white Mic on
Out Standby
(“Memory
Stick”)
Lit orange
Accessing “Memory Stick”
Out Not accessing “Memory
Stick”
Tally lamp Lit orange Camera image being sent
to remote party (lens
cover open)
Flashing orange
(5-second cycle)
Closed image being sent
to remote party (lens
cover close)
Out Camera image not being
sent
Link/Data Lit green Link is established
Flashing green Data is transferring
Out Link is offline
100/
10 Mbps
Lit orange 100 Mbps
Out 10 Mbps
Indicator Status Meaning
2
3
1