Filter
Top Products
58
Adjusting the Camera
Chapter 3 Basic Videoconference
Adjusting the Camera
You can adjust the image shot by the local camera that is
sent to the remote party to obtain the desired angle and
size.
During communication you can also control the camera on
the remote site to adjust the image shot by the remote
camera.
Adjusting the Zoom and Camera
Angle
The zoom and angle can be adjusted from the Camera
Control menu, the camera image during communication,
or the launcher screen when communication is not in
progress.
Adjusting the display using the Camera
Control menu
The remote camera can only be adjusted during
communication.
If the focus adjustment buttons appear on the remote
camera adjustment screen, you can adjust the focus.
1
On the menu selection screen, click “Camera Control”.
The Camera Control menu appears.
2
Select the camera you want to control (“Near system”
or “Far system”).
3
To zoom the image, click the or button under the
image.
4
Click the v/V/b/B symbols at the image edges to
adjust the camera angle.
5
If you selected to control the remote camera, click the
b/B buttons to adjust the focus.
6
Click or the menu bar.
The Camera Control menu closes.
• When controlling a remote camera, “Far End Camera
Control” must be set to “On” in the Communication
Mode menu of the local system, and the remote system
must be set to receive camera control commands. For
details on setting the remote system, refer to the
operating instructions for each device.
• You cannot control the remote camera during a session
if the remote control format of the remote camera is not
H.281. If you cannot control the remote camera, ask the
remote party about the remote control format of their
camera.
• If the local and remote parties try to control the same
camera at the same time, the camera may not operate
correctly.
Adjusting the display during
communication
1
Right-click on the local or remote image.
Zoom and angle buttons appear on the display.
When the image is from the local camera, a
(Backlight compensation) button appears. Each click
of this button toggles the backlight compensation
function on and off.
Zoom
Camera Control
Control by Far End
Near system
Far system
Cancel
Preset
Auto Adjust
Backlight Compensation
Auto
Adjust
Flicker Removal
White Balance
Brightness Adjust
Save Load
Start
01:25
Notes
Note
Focus
Zoom
Camera Control
Control by Far End
Far system
Preset
Save Load
01:25