Filter
Top Products
37
Registering Local Information
Chapter 2
Registration and Setup
Brightness
Adjusts the picture brightness.
The brightness increases as the value gets larger.
Backlight
Adjusts the brightness of the backlight.
The backlight gets brighter as the value gets larger.
Reset
Resets the settings to the default condition.
Wide Mode
Switches the display mode.
When a WXGA 1280
× 768 image is input, it is displayed
in wide mode regardless of the display mode setting.
Normal: Shows the 4:3 image as is.
Wide: Stretches the 4:3 image horizontally to fit the wide
screen.
Zoom: Enlarges the 4:3 image and then crops the top and
bottom to fit the wide screen.
When Picture-and-Picture or Side-by-Side is selected for
the screen layout, the display does not change, even when
Wide Mode is adjusted.
PC Page 2/2
H Shift
Use this item to shift the entire screen horizontally.
Moves the screen left and right.
V Shift
Use this item to shift the entire screen vertically.
Moves the screen up and down.
Phase
Use this item to minimize character blurring and lateral
fringes.
Pitch
Use this item to remove large longitudinal fringes.
Auto Adjust
Automatically adjusts the phase and pitch.
Reset
Resets the settings to the default condition.
Screen Resolution/Refresh Rate
Displays the screen resolution and refresh rate.
The adjustment range of the H Shift and V Shift may differ
depending on the specifications of the RGB signal input.
Note
2/2Display Setup (PC)
Right-click the mouse to display a help message.
50
50
50
50
H Shift
V Shift
Phase
Pitch
Auto Adjust
Reset
1280 768/60Hz
IP:012.345.678.912
Note